THE SOLUTION FOR ALL OF YOUR ELECTRICAL NEEDS

Author Archives: admin

Safety Tips For Avoiding
A Vehicle Collision With A Deer

Like a scene straight out of a sports car commercial, you’re driving along a winding road in the dead of night, the eerie glow from your headlights meeting the narrow asphalt, when suddenly, two green eyes flash in the darkness ahead – and a deer steps onto the roadway.

Unlike the television ad when the driver swerves wildly around the animal and then speeds off carelessly into the blackness, encountering a deer while you’re on the road can be dangerous and scary. According to the National Highway Traffic Safety Administration (NHTSA), large animal-vehicle collisions resulted in an average of 187 fatalities in recent years.

So, what can you do to stay safe through deer country or during seasons when deer are particularly active?  Read on to learn the latest statistics and a few tips for making your drive as safe as possible.

Deer Statistics

  • Dawn and dusk are the times you are most likely to encounter deer along the roadside.
  • Deer breeding season runs from October through early January, and during this time they are highly active and on the move. This is peak time for deer/vehicle collisions.
  • Though deer may wander into suburban neighborhoods, they are most frequently found on the outskirts of town and in heavily wooded areas.
  • As pack animals, deer almost never travel alone. If you see one deer, you can bet that there are others nearby.

Preventive Techniques

  • The two most important ways to avoid a deer/vehicle collision are: slow down and SLOW DOWN. If you are driving through an area known for high deer populations, slow down and observe the speed limit. The more conservative you are with your speed, the more time you will have to brake if an animal darts into your path.
  • Always wear a seat belt. The most severe injuries in deer/vehicle collisions usually result from failure to use a seat belt.
  • Watch for the shine of eyes along the roadside and immediately begin to slow.
  • Use your high beams whenever the road is free of oncoming traffic. This will increase your visibility and give you more time to react.
  • Deer can become mesmerized by steady, bright lights so if you see one frozen on the road, slow down and flash your lights. Some experts recommend one long blast of the horn to scare them out of the road, as well.
  • Pay close attention to caution signs indicating deer or other large animals. These signs are specifically placed in high-traffic areas where road crossings are frequent.
  • If you’re on a multi-lane road, drive in the center lane to give as much space to grazing deer as possible.

Encountering a Deer

  • Never swerve to avoid a deer in the road. Swerving can confuse the deer on where to run. Swerving can also cause a head-on collision with oncoming vehicles, take you off the roadway into a tree or a ditch, and greatly increase the chances of serious injuries.
  • Deer are unpredictable creatures, and one that is calmly standing by the side of the road may suddenly leap into the roadway without warning. Slowing down when you spot a deer is the best way to avoid a collision. However, if one does move into your path, maintain control and do your best to brake and give the deer time to get out of your way.
  • Don’t rely on hood whistles or other devices designed to scare off deer. These have not been proven to work.
  • If you do collide with a deer (or large animal), try to let off the brakes at the moment of impact. Braking through the impact can cause the hood of your vehicle to dip down, which can propel the animal through the windshield.
  • Call emergency services if injuries are involved, or the local police if no one is injured, yet property damage has occurred.
  • Never touch an animal that is in the roadway. Report the incident to your insurance company as soon as possible.

Knowing what to do when you encounter a large animal on or near the roadway can be a life-saver. Keeping calm and driving smart improve your chances of avoiding a collision and staying safe on the road. Safe travels!

How To Avoid Road Rage

Aggressive driving behaviors, such as speeding and tailgating, can often lead to road rage. According to the National Safety Council, motorists rate this as a top threat to highway safety.

Here, we provide practical tips on how to avoid road rage—as well as some startling stats, common reasons that cause road rage and wisdom from experts—to ensure your safety while driving.

7 ways to avoid road rage:

  1. Move over if someone is tailgating you
  2. Use an “I’m sorry” gesture (e.g. wave) to attempt to defuse the situation
  3. Plan ahead; allow time for delays during your journey
  4. Consider whether you’ve done something to annoy the other driver and adjust your driving accordingly
  5. Listen to music you enjoy
  6. Use your horn sparingly
  7. Avoid eye contact with angry drivers and give them plenty of room

“If we can put ourselves in the shoes of other drivers, we are more capable of understanding their behavior and staying calm. If we can’t appreciate their situation, then we are more likely to get offended, angry and even rageful if their driving bothers us.”
— Dr. Robert Nemerovski, psychologist specializing in anger and anxiety

Common reasons drivers experience road rage:

  • Fighting over a parking space
  • Cut off
  • Not allowed to pass
  • Given the finger
  • Annoyed at someone honking too much
  • Stuck behind a slow driver
  • Tailgated

“There’s a lot of talk about driving under the influence, and oftentimes people are referring to drugs or alcohol. But people are driving under the influence every day—and that influence is rage.”
— Shannon Munford, anger management expert

Reasons to avoid aggressive driving:

  • Aggressive driving plays a role in 66% of traffic fatalities
  • 50% of people who encounter aggressive driving behavior respond in kind
  • A firearm is involved in 37% of aggressive driving incidents
  • Out of 10,000 road-rage incidents committed over a seven-year span, there were 218 deaths and 12,610 injuries recorded

“Some good people have bad days and end up in situations they normally never would, simply due to powerful emotions like anger, frustration and stress taking over.”
— Richard Senshido, self-defense expert on de-escalating situations with road ragers

National Teen Driver Safety Week! October 16-22, 2016

8 Danger Zones All Teen Drivers Need to Know

Getting a driver’s license is a rite of passage for teens. It’s an accomplishment that takes months or even years to achieve. Preparing for and earning a driver’s license is an exciting time. And, it’s important for teens to understand and remember that responsibility that comes along with the right to drive.

Share a safe driving tip, save a life.

Check out these resources provided by The Boys & Girls Clubs of America:

Toolkit for Teens

Fall into Safety

Get your flu shot!

Autumn is the start of flu season, and it’s recommended that everyone six months and older gets vaccinated against the flu. Learn more about flu prevention and the flu vaccine.

Reduce fear this Halloween!

Halloween is a fun-filled time for children, yet there are many dangers associated with the holiday unrelated to ghouls, goblins and witches. Parents need to take the necessary Halloween safety precautions to make sure their children remain safe while still having fun.

Drive safely as it gets darker!

Daylight Saving Time ends every year on the first Sunday in November. This means it starts to get darker earlier. As we set our clocks back by one hour in most areas of the country, be acutely aware of your surroundings and continue to drive safely.

Tip: When you change your clocks, it’s also a great time to check the batteries in your smoke alarms and carbon monoxide detectors.

Tips for a Safe and Enjoyable Labor Day Weekend

The Labor Day Holiday is a great and well-deserved opportunity to relax and have some fun.  Unfortunately, our area may experience heavy winds and rains associated with Hurricane Hermine. Before you leave for the weekend, ensure that you are prepared appropriately to protect against the hazards associated with extreme weather.  Don’t forget to monitor the weather report over the weekend and be prepared to adjust your weekend plans accordingly.

Here are some tips to have a safe and healthy holiday.

Food Safety

  • Wash hands thoroughly with soap and warm water before handling food and after handling raw poultry or meat. To guard against cross-contamination of bacteria, keep uncooked meats away from other foods.
  • Cook foods thoroughly, especially ground beef, poultry, and pork.
  • Refrigerate all perishable food within two hours.

Fire Safety

  • When using a grill, be sure to clean it thoroughly to remove any grease or dust. Check for gas leaks. Use the grill outside, not in a garage, porch, or other enclosed space.
  • If you plan to use a fire pit, be sure to put out fire completely before leaving it unattended.
  • Do not park your vehicle on grass as the hot exhaust can easily ignite dry vegetation.

Water Safety

  • Don’t swim alone.
  • Wear a life vest while boating.
  • Supervise children at all times in and near the water.

Sun Safety

  • Use sunscreen with an SPF of 15 or higher. Apply it generously throughout the day.
  • Wear a hat and sunglasses.
  • Drink lots of water to stay hydrated.

Travel Safety

  • Don’t drink and drive or travel with anyone driving who has been drinking.
  • Wear your seatbelt at all times.
  • Make sure your vehicle has been serviced before a long road trip.
  • Familiarize yourself with your surroundings and know where the nearest emergency room is in case of an emergency.

Enjoy the weekend to the fullest and celebrate all of the achievements of America’s workforce both past and present.

Downed Power Lines

Wires installed on utility poles carry electricity. And when wires are down, they are dangerous—electricity can still flow through them.

Never assume that a downed power line is not energized, as it still could be “live.”

  • Stay at least 300 feet away from all downed wires—and keep others from going near them as well. Call police or fire department immediately.
  • Any wire on the ground or hanging from a pole must be considered live. Telephone and cable TV wires may be entangled with electric wires and must also be treated as live.
  • Be especially careful when driving or parking a vehicle near downed wires. If downed wires are in the street, near the curb, or on the sidewalk, use extreme caution. Never drive over downed power lines. Even if not energized, they can become entangled in your vehicle.
  • In the event that a wire comes down on a vehicle with passengers, our advice is to stay in the vehicle until professional help arrives to safely remove you from the vehicle. If you MUST get out of the vehicle because of fire or other life-threatening hazards, jump clear of the vehicle so that you do not touch any part of the car and the ground at the same time. Jump as far as possible away from the vehicle with both feet landing on the ground at the same time.  Once you clear the vehicle, shuffle away, with both feet on the ground, or hop away, with both feet landing on the ground at the same time. Do not run away from the vehicle as the electricity forms rings of different voltages. Running may cause your legs to “bridge” current from a higher ring to a lower voltage ring. This could result in a shock. Get a safe distance away.
  • Never use water on an electric fire, burning vehicle or wire, or extend a pole or stick that can create a path through which the electricity can travel. Our human instinct is to reach out to help, but touching an individual who has been energized also provides a path through which electricity can travel. Call 911 for help immediately.
  • Do not attempt to cut or remove a tree that is, or could become, entangled with power lines. Contact your electric utility provider for assistance and wait for a professional tree removal crew to do the job.
  • Look up! Always examine your surroundings for power line locations before doing any outside work.
  • Do not throw objects up into power lines, as this can cause short circuits that could result in injuries. This includes items you might not consider conductive, such as ropes and strings.
  • Teach children never to play around electric equipment and never to touch power lines. They could be seriously injured or killed if they touch live electrical equipment.

 

July 4th Safety

  1. Be a safe swimmer. Water sports and fireworks are two of the biggest pastimes for Fourth of July celebrations, and these are both linked to numerous deaths and injuries each year. Never swim alone, and make sure that kids’ water play is adequately supervised at all times. Many children or adults drown when other people are nearby, so always have a designated chaperone for water play and don’t assume that others are watching the kids. Statistics show that most young children who drown in pools have been out of sight for less than five minutes. Alcohol consumption also increases the risk of accidental drowning.
  2. If fireworks are legal in your community and are a part of your celebration, be sure to store and use them safely. Keep the kids away from the fireworks at all times, and keep spectators at a safe distance. Attending fireworks displays organized by professionals is always safer than trying to put on your own show.
  3. Use alcohol responsibly. Alcohol and fireworks can be a hazardous and dangerous combination. Also, have a designated driver to bring partygoers home from the festivities. Remember also that alcohol and swimming can be as dangerous as drinking and driving.
  4. Lakes, waterways, and seas will be crowded with boats. Review safe boating practices, and don’t drink and drive your boat. Alcohol consumption while operating boats or other motorized water vessels is illegal, and you can be arrested for a BWI (boating under the influence!). Be sure that you have an adequate number of life preservers on hand for extra guests. Become familiar with the boating laws in your area.
  5. Cover food and beverages outdoors to discourage bees and wasps from attending your party. If someone is allergic to insect stings, you should have an emergency anaphylaxis kit on hand. Wearing shoes, long sleeves, and long pants outdoors and avoiding fragranced body products, bright colors, and sugary drinks can also help prevent bee stings.
  6. Apply sunscreen both before and during an outdoor party. Ultraviolet rays from the sun can cause both premature aging and skin cancer in the long term, and a painful burn the next day. Even those with darker skin should use a sunscreen with a minimum sun protection factor (SPF).
  7. Check prescription medications you are taking to assure you will not have a sun-sensitizing drug reaction to the medication.
  8. If you’ll be hiking or camping in an area where ticks are abundant, wear long-sleeved, light-colored shirts and long pants tucked into socks or boots to protect yourself from tick-borne diseases. For your skin, you can use a tick repellent with no more than 30% DEET according to the manufacturer’s instructions. Products containing DEET should not be used on children less than 2 months of age and should not be applied to the hands or face of young children. Check yourself (and your pets) for ticks at the end of the day.
  9. Spend adequate time indoors or in the shade and drink plenty of fluids to avoid heat illness in extremely hot climates. The risk of heat-related illness is increased when participating in strenuous activity or sports, and those with chronic medical conditions and the elderly are also at an increased risk of heat exhaustion and/or heat stroke. Alcohol consumption can also promote dehydration and increase the risk.
  10. Keep children away from campfires and grills. Gas leaks, blocked tubes, and overfilled propane tanks can be a cause of grill fires and explosions.
  11. Don’t leave the picnic spread out all day. Allowing food to sit in outdoor temperatures can invite food-borne illness. The U.S. FDA suggests never leaving food out for more than one hour when the temperature is above 90 F and not more than two hours at other times. Foods that need to be kept cold should be placed in a cooler with plenty of ice or freezing packs and held at a maximum temperature of 40 F. While mayonnaise and other egg dishes are often associated with food poisoning, any food can potentially become contaminated. Adequate hand washing and food preparation can also help prevent food poisoning.

It’s Safety Week

The U.S. Department of Labor’s Occupational Safety and Health Administration and other federal safety agencies have designated May 2-6, 2016, as the third annual National Safety Stand-Down. The purpose of the National Fall Prevention Stand-Down is to raise awareness nationwide of preventing fall hazards in construction. Fatalities caused by falls from elevation continue to be a leading cause of death for construction workers, accounting for 337 of the 874 construction fatalities recorded in 2014 (from Business and Labor Statistics preliminary data). Those deaths were preventable. Fall prevention safety standards were among the top 10 most frequently cited OSHA standards, during fiscal year 2014.

RAI participates by conducting the Tool Box Talk: Preventing Falls, downloadable here.

Help make workplaces safe!

OSHA-Cert2016w

Micro Grid Project to Shrink Carbon Footprint and Energy Bills for New Jersey Senior Living Facility

South Jersey-Based Alternative Energy Specialist Ray Angelini Inc. Provides All Construction Services On Project

DEPTFORD TOWNSHIP, NJ (April 22, 2016)—On Earth Day, Ray Angelini, Inc. (RAI) celebrated along with industry allies, the recent completion of a $8.9 million sustainable makeover of the Masonic Village senior living community, Burlington, NJ, a project that makes Masonic Village part of the trend toward energy efficient and resilient senior living facilities in the northeastern United States.

Energy management and combined heat and power (CHP) specialist ENER-G Rudox Inc., alternative energy specialist Ray Angelini Inc. (RAI), Blue Sky Power LLC, and MCFA Global teamed up to complete the design, engineering, construction, and financing on the Masonic Village campus-wide micro grid project. The project will result in carbon and cost savings at no capital expense to the charitable organization.

“The upgrades will reduce the facility’s carbon footprint by approximately 452 metric tons per year, the equivalent benefit of negating more than one million miles driven by the average car,” said Mike Wessner, business development manager, RAI.

“With this project, ENER-G Rudox delivers a solution that many are excited about, but few have accomplished. We have been able to turn the ‘academic’ potential of microgrids that drives analysts’ optimism, into a practical real world solution. The total package will provide economic benefits, as well as redundancy and sustainability for Masonic Village,” said Ryan Goodman, President, ENER-G Rudox.

The multi-million dollar energy infrastructure improvements to the 450-acre campus include the installation of a highly efficient 498 kW natural gas CHP system that provides heat and electricity for the facility. Additionally, the project includes comprehensive lighting and boiler plant upgrades to reduce the facility’s current energy profile.

“RAI constructed, installed and integrated the CHP system with the facility’s existing 1.16 megawatt solar PV field and 1.5 megawatt standby diesel generator,” said Wessner. “This integration enables 100% operational capability in the event of a grid outage.”

The project is financed using the ENER-G Rudox Energy Services Agreement. Under this arrangement, the Masonic Charity Foundation is responsible for $0 in up-front investment capital and receives a guaranteed minimum savings of $209,000 per year over the 20-year contract term.

“The Masonic Village at Burlington is an outstanding facility dedicated to its residents The unity of purpose of the Board of Trustees, ENER-G, MCFA, RAI and Blue Sky Power combined with the support of the Board of Public Utilities and PSE&G enabled us to bring a truly innovative clean energy micro gird to fruition at the almost 120 year old facility, making it one of the most sustainable, energy efficient and resilient senior living communities in the country,” said Ben Parvey, CEO of Blue Sky Power.

“Assisted living and senior care facilities are often excellent candidates for distributed generation technologies due to their operating profiles and infrastructure requirements. In the wake of Hurricane Sandy, we’ve seen an increased interest in improving resiliency in these facilities,” Goodman continued. “However, many facility managers are unaware of the fact that they can improve resiliency while simultaneously reducing their carbon footprint and saving money. The Masonic Village project illustrates this capability, and thus enables the facility to remain on the cutting edge of its industry.”

The economic benefits of CHP are derived from improved efficiency in comparison to traditional utility-grade power plants. While the typical plant is 35 percent efficient and loses an additional 1-2 percent in transmission, onsite CHP technologies can reach efficiencies of over 85 percent by reusing the waste heat that is a natural by-product of electric generation. In addition, incentives are available in New Jersey and other states to help offset the cost of CHP projects. The Masonic Village received a $996,000 grant from the New Jersey Board of Public Utilities for execution of this project.

“It takes a forward thinking executive team to accomplish a project of this magnitude, and we would like to thank the Masonic Village of Burlington, NJ and Ashlar Creative Solutions for their contributions throughout this process.” said Goodman. “In addition, the staff at PSE&G, TRC, and the New Jersey Board of Public Utilities all played critical roles in making this project happen, and showed exactly why New Jersey is a national leader in alternative energy adoption. We would also like to thank our partners at Blue Sky Power, Ray Angelini Inc. and MCFA Global, who continue to set themselves apart in their ability to facilitate and execute these types of projects.”

“RAI has long made it a goal to provide construction means and methods for alternative energy solutions,” says RAI President and Founder Raymond J. Angelini. “We are dedicated to being stewards of our environment and applaud Masonic Village for its achievement with this special project.”

For more information on this project, or to have a free CHP feasibility study performed for your building, please contact Ray Angelini, Inc.:  856-228-5566; info@raiservices.com, http://www.raiservices.com

mason1bw
RAI Founder and President
Ray Angelini (left) with NJ Board
of Public Utilities Commissioner
Upendra Chivukula.
masonic1w
(From left to right) Michael Fuhman, Managing Principal,
MCFA Global; Ben Parvey, Blue Sky Power;
Ray Angelini, Ray Angelini, Inc.;
Ryan Goodman, President, ENER-G Rudox, Inc.

$3.2 Million Clean Energy Infrastructure Project To Shrink Carbon Footprint, Improve Operations at Philadelphia Senior Living Facility

South Jersey-Based Contractor Ray Angelini, Inc.
Completes Mechanical and Electrical Components

DEPTFORD TOWNSHIP, NJ (April 18, 2016)—New Jersey-based energy management and combined heat and power (CHP) specialist ENER-G Rudox Inc.—in conjunction with clean energy specialists Ray Angelini Inc. (RAI), Blue Sky Power LLC, and MCFA Global—recently completed the design, engineering, construction, and financing of a sustainable makeover project at Cathedral Village, a Philadelphia-based continuing care retirement community.

The multi-million dollar energy infrastructure improvements to the 40-acre campus include the installation of an energy efficient 265 kilowatt natural gas CHP system to provide heat and electricity for the retirement community. Additionally, the project includes comprehensive lighting upgrades throughout the facility and the replacement of six rooftop heating and cooling units.

RAI was responsible for the overall construction of the project. The CHP, a 265 kilowatt natural gas powered cogeneration unit, was tied into the Boiler House loop to help supplement heat and interconnected to the incoming 15 kilovolts utility service.

“RAI completed this project with little to no downtime or inconvenience to the community’s residents,” said Mike Wessner, business development manager, RAI.

The entire project is financed with the ENER-G Rudox Energy Services Agreement. Under this 20-year arrangement, Cathedral Village had $0 in up-front investment capital and expects to reduce its utility electric bill by over $145,000 annually. The upgrades will reduce the facility’s carbon footprint by approximately 350 metric tons per year, the equivalent benefit of removing 74 passenger cars from the road, or the carbon dioxide that would be offset by 287 acres of forest in one year.

“Assisted living and senior care facilities are often excellent candidates for clean energy projects, yet many facilities assume these projects require a large initial capital expenditure,” said Blue Sky Power CEO Ben Parvey. “However, by utilizing alternative finance structures, such as the ENER-G Rudox Energy Services Agreement, many institutional, commercial and industrial facilities can realize the operational, economic and environmental benefits of energy systems upgrades, without a capital burden.”

The Cathedral Village project received support from both state and local sources, including a $500,000 grant from Pennsylvania’s Commonwealth Financing Authority. In addition, the project is the recipient of $123,500 through the PECO Smart-On Site Program, plus a long-term co-generation gas service contract from PGW.

“Executing these types of projects is truly a team effort, and the contributions from the Commonwealth Financing Authority, PECO, and PGW were critical in allowing this project to move forward.” said ENER-G Rudox President Ryan Goodman. “However, at the end of the day, the most important criteria we evaluate is the strength of our client’s decision making team, as our ‘Energy Services Agreement’ represents a long term partnership. We couldn’t be more impressed with Cathedral Village’s team, and we are tremendously excited to work closely with them over the next 20 years.”

“The goal for RAI is to provide construction means and methods for alternative energy solutions,” says RAI President and Founder Raymond J. Angelini. “This goal was completely realized with the services we provided Cathedral Village. We can achieve no higher goal than to be stewards of our environment and applaud Cathedral Village for this achievement.”

For more information on this project, or to have a free CHP feasibility study performed for your building, please contact Ray Angelini, Inc.: 856-228-5566, info@raiservices.com, http://www.raiservices.com.

About Ray Angelini Inc.

RAI is a multi-services electrical contractor that builds and maintains all types of electrical projects. Services include: Commercial and industrial electrical contracting for entities such as data centers, hospitals, and utility substations; alternative energy provider, specifically solar EPC and maintenance, cogeneration construction, and LED lighting design and retrofits; wireless infrastructure services such as Distributed Antenna Systems (DAS) and cell tower construction/modifications; and power systems testing and commissioning. RAI has the ability to work at all voltages and with all substation equipment and experienced tag-holder personnel to provide the highest level of safety and reliability. The company proudly holds an Experience Modification Rate (EMR) of .556, a number used by insurance companies to gauge both past cost of injuries and future chances of risk. The lower the EMR, the better. An EMR of 1.0 is considered the industry average. RAI clients receive a unique knowledge, business savvy, and confidence that comes from over 40 years of experience serving in the electrical industry.

cathedralvillagew
Representatives from Cathedral Village, Ray Angelini Inc., Blue Sky Power, and MCFA Global
mark the completion of a multi-million clean energy project at an Environmental Stewardship
and Sustainability Celebration on April 18, 2016 at Cathedral Village, a Presbyterian Senior
Living Community in Philadelphia, PA.

Contact Us

  • NJ Electrical Contractor Lic. #34EI00502000
  • NJ Electrical Bus. Permit #34EB00502000
  • DE Licensed Eletrician #T1-0002011
  • Philadelphia Electrical Lic. #3516-14759
  • Maryland License #8337
  • Bonding Capacity $175,000,000
Find Us on Facebook Icon
twitter logo